Epson 1810p - PowerLite XGA LCD Projector Installation rapide

Parcourez en ligne ou téléchargez le pdf Installation rapide pour {nom_de_la_catégorie} Epson 1810p - PowerLite XGA LCD Projector. Epson 1810p - PowerLite XGA LCD Projector 2 pages. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Également pour Epson 1810p - PowerLite XGA LCD Projector : Manuel de l'utilisateur (42 pages), Manuel d'utilisation (47 pages), Manuel de l'utilisateur (27 pages), Bulletin d'information sur les produits (5 pages), Déclaration de conformité (4 pages), Liste des pièces (1 pages), Brochure (2 pages), Bulletin d'information sur les produits (41 pages)

Imprimer la page
Epson 1810p - PowerLite XGA LCD Projector Installation rapide
C
onnect the projector
to your notebook
1
Locate the required cables:
2
C onnect the computer cable to the blue
Computer1 port on the projector.
3
C onnect the other end to your notebook's
video-out or
monitor port.
NOTE:
If your notebook has a DVI connector, you need to use an
optional DVI-to-VGA adapter with the included computer cable
(see your computer's documentation).
4
Connect the power cord to the
projector, then plug the other end
into an electrical outlet.
T
urn on your equipment
1
T urn on your notebook.
2
Open the A/V Mute slide (lens cover).
NOTE:
The slide must be
opened completely.
3
Make sure the Power light
is orange and not flashing.
4
Press the
Power button
to turn on the projector.
To shut down the projector:
1. Press the
Power button twice.
2. W hen the orange light stops flashing and the projector beeps,
you can unplug the projector.
Power cord
VGA computer cable
Power light
Power button
Before using the projector, make sure you read the safety
instructions in the User´s Guide on your projector CD.
Follow these instructions to connect the projector to your notebook.
For other setup options, see your User's Guide.
A
djust the image
1
I f you've turned on your notebook and you don't see an image, press
the Source Search button on the projector or the Search button on
the remote control to select the image source.
NOTE:
If you still see a blank screen or have other display problems,
see the troubleshooting tips on the back of this sheet.
2
T o raise the image, press
the foot release button
for the front adjustable
foot and lift the front.
Release the button to
lock the foot in position.
3
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or
enlarge the image.
4
I f your image looks like
button on the projector and follow the on-screen instructions.
Turn over
PowerLite
®
Quick Setup
Focus
Zoom
, press the Quick Setup
,
,
, or
1810p