Samsung 7 Series Manuel de l'utilisateur - Page 20

Imprimer la page

Samsung 7 Series Manuel de l'utilisateur

Using the Remote Control Backlight Buttons

Use this feature in dark surroundings and when you are unable to see the remote control buttons clearly.

Press the ON/OFF

➢

Pressing the ON/OFF

➢

When ON, the button backlight is turned on for a moment.

➢

Pressing a remote control button when the remote control is on turns the button backlight on for a moment. If

you touch or move the remote control and the motion is detected by the sensor of the remote control, the button

backlight will be turned on for a moment.

➢

Since there is a vibrating device inside the remote control, shaking the remote control will result in a sound

generated by the device.

➢

The button backlight will not be turned on when the remote control is turned off.

Using the TOOLS Button

You can use the TOOLS button to select your frequently used functions quickly and easily. The TOOLS menu

changes depending on which external input mode you are viewing.

Press the TOOLS button.

The TOOLS menu will appear.

Press the ▲/▼ button to select a menu, then press the ENTER button.

P ress the ▲/▼/◄/►/ENTER buttons to display, change, or use the selected

items. For a more detailed description of each function, refer to the

corresponding page.

● Device List, see page 125

● Multi-Track Sound, see page 38

● Picture Size, see page 28

● Picture Mode, see page 23

● Sound Mode, see page 36

● Sleep Timer, see page 55

● Add to Favorite, see page 43

● Switch to Cable(or Switch to Air), see pages 20~21

● PIP: see pages 34~35

● Auto adjustment: see page 50

Memorizing the Channels

Your TV can memorize and store all of the available channels for both air and cable channels. After the available

channels are memorized, use the CH

to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a

broadcast source, memorizing the channels (automatic) and adding and deleting channels (Channel Lists).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must

specify the type of signal source that is connected to the TV (i.e. an Air or a Cable

system).

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Channel, then press the ENTER button.

Press the ENTER button to select Antenna.

Press the ▲ or ▼ button to select Air or Cable, then press the ENTER button.

Press the EXIT button to exit.

light button

light button toggles between ON and OFF.

or CH

button to scan through the channels. This eliminates the need

Continued...

English - 0

Tools

Anynet+ (HDMI-CEC)

Multi-Track Sound :

Stereo

Picture Size

16:9

Picture Mode

Standard

Sound Mode

Custom

Sleep Timer

Off

Add to Favorite

Switch to Cable

Move

Enter

Antenna

: Air

Auto Program

Clear Scrambled Channel

Channel List

Fine Tune

Signal Strength