Samsung 920NW - SyncMaster - 19" LCD Monitor Manuel de l'utilisateur - Page 21

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Samsung 920NW - SyncMaster - 19" LCD Monitor. Samsung 920NW - SyncMaster - 19" LCD Monitor 46 pages.

Imprimer la page

1. Click " Start " , " Setting " , " Control Panel ".

2. Double click the " Display " Icon.

3. Choose the " Settings " tab and then click " Advanced.. ".

4. Choose " Monitor ".

Case1: If the "Properties" button is inactive, it means your monitor is properly configured.

Please stop installation

Case2: If the "Properties" button is active, click the "Properties" button then follow next steps

continually.

5. Click " Driver " and then click on " Update Driver.. " then click on the "Next" button.

6. Choose " Display a list of the known drivers for this device so that I can choose a

specific driver " then click " Next " and then click " Have disk ".

7. Click the " Browse " button then choose A:(D:\Driver).

8. Click the " Open " button, then click " OK " button.

9. Choose your monitor model and click the " Next " button then click " Next " button.

10. Click the " Finish " button then the " Close " button.

If you can see the " Digital Signature Not Found " window then click the " Yes "button.

And click the " Finish " button then the " Close " button.

Microsoft

Windows

1. Click " Start " , " Setting " , " Control Panel ".

2. Double click " Display " icon.

3. Select the " Settings " tab and click " Advanced Properties " button.

4. Select the " Monitor " tab.

5. Click the " Change " button in the " Monitor Type " area.

6. Choose " Specify the location of the driver ".

7. Choose " Display a list of all the driver in a specific location.. " then click " Next " button.

8. Click the " Have Disk " button

9. Specify A:\(D:\driver) then click " OK " button.

10. Select " Show all devices " and choose the monitor that corresponds to the one you

connected to your computer and click " OK ".

11. Continue choosing " Close " button and " OK " button until you close the Display Properties

dialogue box.

Microsoft

Windows

1. Click Start , Settings , Control Panel , and then double-click Display icon.

2. In Display Registration Information window, click Settings Tab and then click All Display

Modes .

3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency)

and then click OK .

4. Click Apply button if you see the screen working normally after clicking Test . If the screen is

not normal, change to a different mode (lower mode of resolution, colors or frequency).

If there is no Mode at All Display Modes , select the level of resolution and vertical

frequency by referring to the

Linux Operating System

To execute X-Window, you need to make the X86Config file, which is a type of system setting file.

1. Press Enter at the first and the second screen after executing the X86Config file.

2. The third screen is for setting your mouse .

3. Set a mouse for your computer.

4. The next screen is for selecting a keyboard .

5. Set a Keyboard for your computer.

6. The next screen is for setting your monitor .

7. First of all, set a horizontal frequency for your monitor. (You can enter the frequency

directly.)

8. Set a vertical frequency for your monitor. (You can enter the frequency directly.)

9. Enter the model name of your monitor . This information will not affect the actual execution

of X-Window.

10. You have finished setting up your monitor.

Execute X-Window after setting other requested hardware.

Millennium Operating System

NT Operating System

Preset Timing Modes

in the user guide.