Samsung 933HD - SyncMaster Plus - 18.5" LCD Monitor Manuel de l'utilisateur - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Samsung 933HD - SyncMaster Plus - 18.5" LCD Monitor. Samsung 933HD - SyncMaster Plus - 18.5" LCD Monitor 43 pages. Samsung lcd tv monitor user manual
Imprimer la page
If you want to reset this feature...
1. Press the mENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the E button.
2. Press the E button again to select "Plug & Play". For further details on setting up options.
The "
N
CHANNEL CONTROL
Configuring the Channel Menu
¦
Antenna → Air
❑
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
Press the
T
also set the Antenna by selecting "Tools → Switch to Cable
(or Switch to Air)".
Auto Program
❑
Air
: Air antenna signal. / Cable: Cable antenna signal. /
Auto: Air and Cable antenna signals
When selecting the Cable TV system: Selects the cable system. STD, HRC and IRC identify
N
various types of cable TV systems. Contact your local cable company to identify the type of cable
system that exists in your particular area. At this point the signal source has been selected.
After all the available channels are stored, it starts to remove scrambled channels (Clearing
N
Scrambled Channels). The Auto program menu then reappears.
If you want to stop Auto Programming, press the
N
message will be displayed. Select "Yes" by pressing the ◄ or ► button, then press the E
button.
Clearing Scrambled Channels
❑
This function is used to filter out scrambled channels after "Auto Program" is completed. This
process may take up to 20~30 minutes.
To stop searching scrambled channels: Press the
N
to select "Yes", then press the button.
This function is only available in "
N
Channel List
❑
For the detailed procedures on using the "Channel List", refer to the 'managing Channels'
instructions.
You can select these options by simply pressing the
N
Fine Tune
(analog channels only)
❑
Use fine tuning to manually adjust a particular channel for optimal reception.
If you do not store the fine-tuned channel in memory, adjustments are not saved.
N
"*" will appear next to the name of fine-tuned channels.
N
To reset the fine tuning setting, press the ▼ button to select "
N
BN59-00905F_eng.indd 12
Plug & Play" feature is only available in the TV mode.
/ Cable
TOOLS button to display "Tools" menu. You can
(digital channels only)
Cable" mode.
CHANNEL CONTROL
E button. The "Stop Auto Program?"
E button to select "Stop". Press the ◄ button
CH LIST button on the remote control.
Reset", then press the E button.
English - 12
Antenna
: Air
►
Auto Program
Clear Scrambled Channel
Channel List
Fine Tune
2009-11-10 9:30:41