Epson 745c - PowerLite XGA LCD Projector Manuel - Page 16

Imprimer la page

Epson 745c - PowerLite XGA LCD Projector Manuel

Epson PowerLite 745c Projector

4. Once the name of your projector appears, select it and click

. If more than one projector is listed, you can

Connect

select up to four additional projectors and connect to them

at the same time. If the selected projector is being used by

another person, you can still connect to it; doing so

automatically disconnects the other user.

5. If you are prompted for a keyword, enter the four-digit

number displayed on the EasyMP Network screen and

click

6. Once the connection is established, you see your

computer's image transmitted to the projection screen, and

a floating control bar:

7. From the control bar, you can access these NS Connection

features:

Provides help for NS Connection.

Lists projectors and specifies which ones are

in use.

Lets you access the projector's menu system

from an HTML browser window.

Lets you keep the projected image on the

screen, even if the image on your computer

changes.

Turns off the image and sound.

Lets you zoom in on a part of the image.

Lets you change the brightness, contrast, and

color mode.

Lets you switch between the Video and

S-Video ports.

Epson PowerLite 745c Projector

Click here to minimize

8/04

Lets you switch between the computer and

EasyMP.

Flashes three lights in sequence when the

computer and projector connection is active.

8. When done with your presentation, click

the control bar.

Connecting in IP Connect Mode

Even if your projector and computer are on a different subnet

(Access Point mode only) or connecting over different routers,

you can establish a connection manually using IP Connect

Mode.

1. Start NS Connection on the computer to which you want

to connect. You see this screen:

2. Click the

button. You see this screen:

Extension

Click here

Disconnect