Digital Home System Foscam FI8910W Manuel d'intégration - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'intégration pour {nom_de_la_catégorie} Digital Home System Foscam FI8910W. Digital Home System Foscam FI8910W 2 pages. Integration manual with vera 3 / lite ui7

Imprimer la page

Installing Foscam Plugin

 Setup the camera in your home network, before you

can include the camera in Vera.

 By default camera pre-sets and motion detection are

disabled on FI8910W camera. You have to enable and test

them before integrating with your Vera controller. Login

into Foscam Management interface for camera and enable

these options.

 Download and install Foscam plugin. Login into your

Vera controller and search for "Foscam IP Camera" in

Apps --> Install apps --> Search app.

 Choose Foscam IP Camera from the list and click

"Details"

 Confirm that you have selected non H.264 Foscam

camera plugin version 2.6 and click on "install". After

downloading and a few minutes of setup configurations

you should see a message saying "it's now safe to exit

this screen". Click on "Exit".

 You should now have Foscam IP Camera plugin in-

stalled under the "My apps" section.

Adding Foscam to Vera

 Foscam IP Camera has to be added manually as gener-

ic IP camera. Go to:

Devices --> Additional Devices --> Security Cam-

eras --> IP Camera (Generic IP Camera).

 Automated option will not detect Foscam IP camera.

You need to go through a few "Next" buttons until you

reach the screen with "Manually Install the camera

(advanced)".

You could also add your camera through the

TIP:

Camera section

Pairing Foscam Camera

 Name your camera. Fill in the username and password.

 Choose "Other IP Camera" from Choose "Other IP Cam-

era" from the "select camera type" list.

 Paste the full URL which returns a JPG snapshot.

http://<your camera ip address>/snapshot.cgi?

user=<your userid>&pwd=<yourpassword>

 To fill out IP address (the section is graded out) you

need to click on "List Network Devices" button (down below

the screen). Vera will scan active IP devices in your net-

work. Find your camera IP address and click on "add" to

add that IP.

TIP:

If you can't find the IP address of your camera, try to

re-boot it

 You can choose a "Room" now (if you have any) or later.

 You will notice that long "Next" button on the bottom of

the page is selectable now. Click on it to go the next step.

 "Authentication required" window pops up. Click on

"Cancel" and "Next" even if the image is not displayed cor-

rectly.