Epson 7850p - PowerLite XGA LCD Projector Manuel d'information sur les produits - Page 21

Imprimer la page

Epson 7850p - PowerLite XGA LCD Projector Manuel d'information sur les produits

EPSON PowerLite 7850p Projector

The following tables explain the status, video source, and error

icons.

Status icons

(green)

Projecting; no problems

(dark)

Turned off; no problems

(green)

Projecting; problems detected

(dark)

Turned off; problems detected

Network error (for example, not connected to

network or power cable disconnected).

You may also see this error if

is selected in

Video source icons

Computer

BNC

S-Video

Video

DVI

Error icons

Lamp replacement notification (the lamp is

nearing the end of its life; see page 22)

High-speed cooling in progress (the

projector is getting too hot but continues to

operate)

Overheating (projection turned off

automatically)

Lamp out or lamp cover open

Fan error

Sensor error

Internal problem

EPSON PowerLite 7850p Projector

Network OFF

Standby Mode

Controlling Your Projectors

The control buttons in the upper-right of the EMP Monitor

screen let you turn the projectors on and off and select video

sources. (Hold the mouse pointer over a button to see a

description of its meaning.) Make sure you've selected the

projector(s) you want to operate before clicking one of the

buttons.

Note: To turn on a projector when it's in standby mode (plugged in

but not projecting), first select

setting in the projector's Advanced1 menu.

Mode

Configuring the Monitoring Interval

If you need to have the most current status information about

your projectors, click the

Monitor screen.

You can also select how often EMP Monitor checks the

projector status:

1. From the Tool menu, select

screen.

Note: If you want EMP Monitor to run whenever you start

your computer, click

2. Select the desired update interval and click

6/03

Control buttons

as the

Network ON

Standby

button on the EMP

Refresh

. You see this

Configuration

Add to Startup