Siemens ZIC-4AC Manuel d'instructions d'installation - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Siemens ZIC-4AC. Siemens ZIC-4AC 12 pages. Zone interface card
Imprimer la page
INSTALLATION
The ZIC-4AC plugs perpendicularly into one slot in the CC-5 card-cage via two
96-pin DIN connectors and can occupy any slot in the card cage. (Refer to
Figure 4.)
Insert the ZIC-4AC card into the card guides right side up (lettering on the
front panel is legible)
Slide the card in until the card edge connectors contact the receptacles on
the motherboard.
Verify that the DIN connectors of the card and the card-cage aligned properly.
The card can only plug in one direction to the card cage, if it does not align,
DO NOT FORCE the card.
Place thumbs on the front panel adjacent to the captive screws and gently
apply even pressure on the card until the connectors seat in the receptacles
on the motherboard.
Secure with the captive screws.
Figure 4
Installing The ZIC-4AC
6
A24205-A334-B827
P/N 315-035850-2