Siemens CB675GB.3 Manuel de l'utilisateur et instructions d'installation - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur et instructions d'installation pour {nom_de_la_catégorie} Siemens CB675GB.3. Siemens CB675GB.3 32 pages.
6 Accessories
Use original accessories. These have been made espe-
cially for your appliance.
Note: Accessories may become deformed if they get
hot. Deformation has no effect on function. As the ac-
cessory cools down, it will regain its original shape.
Accessories
Wire rack
Universal pan
6.1 Locking function
The locking function prevents the accessories from tilt-
ing when they are pulled out.
You can pull out the accessories approximately halfway
without them tipping. The accessories must be inserted
into the cooking compartment correctly for the tilt pro-
tection to work properly.
6.2 Sliding accessories into the cooking
compartment
Always slide the accessory into the cooking compart-
ment the right way round. This is the only way to en-
sure that accessories can be pulled out approximately
halfway without tipping.
1.
Turn the accessories so that the notch
rear and is facing downwards.
Insert the accessory between the two guide rods for
2.
a shelf position.
Wire rack
Insert the wire rack with the open
side facing the appliance door and
the curved lip
is at the
facing downwards.
The accessories supplied may differ depending on the
appliance model.
Use
¡ Cake tins
¡ Ovenproof dishes
¡ Cookware
¡ Meat, e.g. roasting joints or steak
¡ Frozen meals
¡ Moist cakes
¡ Baked items
¡ Bread
¡ Large roasts
¡ Frozen meals
¡ Catch dripping liquids, e.g. fat when
grilling food on the wire rack.
Baking tray
Slide the tray in with the sloping
E.g. univer-
edge
sal pan or
baking tray
Push the accessory all the way in, making sure that
3.
it does not touch the appliance door.
Note: Take any accessories that you will not be using
out of the cooking compartment while the appliance is
in operation.
Combining accessories
You can combine the wire rack with the universal pan
to catch any liquid that drips down.
Place the wire rack on the universal pan so that
1.
both spacers
are on the rear edge of the univer-
sal pan.
Insert the universal pan between the two guide rods
2.
for a shelf position. In so doing, the wire rack is on
top of the upper guide rod.
Wire rack
on univer-
sal pan
Accessories en
towards the appliance door.
9