Siemens CM736G1.1B Manuel de l'utilisateur et instructions d'installation - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur et instructions d'installation pour {nom_de_la_catégorie} Siemens CM736G1.1B. Siemens CM736G1.1B 44 pages.

Imprimer la page
en Rapid heating
Change the temperature using
2.
justment bar. Or enter the temperature directly via
the number field
​ ⁠ .
Press "Apply".
3.
8.7 Displaying information
In most cases, you can call up information about the
function that you have just started. The appliance auto-
matically displays certain information, e.g. to ask you to
do/confirm something or to issue a warning.
Press ​ ⁠ .
1.
a If information is available, this is displayed for a few
seconds.
If there is a lot of content in the tile, scroll using
2.
or
​ ⁠ .
3.
If required, close the notification using
8.8 Sabbath-compliant use
If you want to operate your appliance so that it is Sab-
bath-compliant, use the time-setting options and
change the basic setting for the lighting.
Note: If you open the appliance door during operation,
the appliance stops heating. When you close the appli-
ance door, the appliance continues to heat again.
Change the "Lighting" basic setting to "Always off".
1.
→ "Basic settings", Page 20
9  Rapid heating
To save time, rapid heating
ing time for set temperatures over 100 °C.
Rapid heating is possible for the following types of
heating:
¡ 4D hot air
​ ⁠
¡ Top/bottom heating
9.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Note: Do not set a cooking time until rapid heating has
come to an end.
10  Time-setting options
For an operation, you can set the cooking time and the
time at which the operation should be finished. The
timer runs independently of the operation.
Time-setting
Use
option
Cooking time
If you set a cooking time, the appli-
​ ⁠
ance stops heating automatically
once this time has elapsed.
14
​ ⁠ or
​ ⁠ or via the ad-
​ ⁠ .
​ ⁠ can shorten the preheat-
​ ⁠
This will ensure that the light in the cooking com-
partment is always off while the appliance is in oper-
ation and when you open the appliance door.
Set the required operating mode.
2.
→ "Setting an operating mode", Page 13
→ "Setting the type of heating and the temperature",
Page 13
Set the required cooking time depending on the op-
3.
erating mode.
→ "Setting the cooking time", Page 15
→ "Time-setting options", Page 14
4.
Use "End time" to set the time at which the opera-
tion should end.
→ "Setting the end time", Page 15
​ ⁠
→ "Time-setting options", Page 14
Place the food in the cooking compartment before
5.
the appliance starts to heat.
Start the operation.
6.
a The display shows the start time. The appliance is in
standby mode.
a Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down.
7.
When the operation has ended, remove the food
from the cooking compartment. The appliance auto-
matically switches off completely after approx. 15 to
20 minutes.
Note: If necessary, change the basic setting for the
lighting again.
Set a suitable type of heating and a temperature of
1.
at least 100 °C.
Rapid heating automatically switches off as of a set
temperature of 200 °C.
Press "Rapid heating".
2.
a "On" is in the tile.
Use
​ ⁠ to start the operation.
3.
a Rapid heating starts.
a Once rapid heating is complete, a signal tone
sounds. "Off" appears for "Rapid heating"
4.
Place the food in the cooking compartment.
Cancelling rapid heating
Press "Rapid heating".
▶
a For "Rapid heating"
​ ⁠ .
​ ⁠ "Off" appears on the display.