Siemens CM736G1.1B Manuel de l'utilisateur et instructions d'installation - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur et instructions d'installation pour {nom_de_la_catégorie} Siemens CM736G1.1B. Siemens CM736G1.1B 44 pages.

Imprimer la page
en Ventilation function Crisp Finish
When the food is ready, use
‒
pliance off.
Changing added microwave
You can change or deactivate the added microwave at
any time.
12  Ventilation function Crisp Finish
The ventilation function "Crisp Finish"
ture from the cooking compartment so that your meal
will be more crispy.
Hot steam that may escape when the appliance door is
opened is reduced.
12.1 Suitable types of heating with the
ventilation function
Only certain types of heating are suitable for the ventil-
ation function.
You can use the ventilation function for the following
types of heating:
¡ 4D hot air
​ ⁠
¡ Top/bottom heating
¡ Pizza setting  ​ ⁠
¡ Circulated air grilling  ​ ⁠
12.2 Setting the ventilation function
You can activate the ventilation function at any time,
even after the start of the operation.
Set a suitable type of heating and a temperature.
1.
13  Dishes
The "Dishes" operating mode helps you to use your ap-
pliance to prepare different meals by selecting the op-
timum settings automatically.
13.1 Cookware for dishes
The cooking result depends on the composition of the
meat and the size of cookware.
You should therefore use heat-resistant cookware that
is suitable for temperatures up to 300 °C. Glass or
glass ceramic cookware is best. The joint should cover
approx. 2/3 of the cookware base.
Cookware made from the following material is not
suitable:
¡ Bright, shiny aluminium
¡ Unglazed clay
¡ Plastic or plastic handles
Note: For some dishes, the appliance switches on the
microwave. A notification appears in the display stating
that you should use cookware that is suitable for mi-
crowave use.
→ "Cookware and accessories with microwave",
Page 16
18
​ ⁠ to switch the ap-
​ ⁠ extracts mois-
​ ⁠
Press the microwave output setting.
1.
Change or deactivate the microwave output setting.
2.
Press "Apply".
3.
If required, you can select other settings and com-
bine with the ventilation function.
2.
Press "Crisp Finish".
a "On" is in the tile.
Press
​ ⁠ to start the operation.
3.
a The appliance starts heating.
a The setting values are shown on the display.
4.
When the food is ready, use
ance off.
Note: Amplified fan noises can be heard while the ap-
pliance is in operation.
Cancelling the ventilation function
You can switch off the ventilation function at any time.
Press "Crisp Finish"
▶
a For "Crisp Finish"
a The operation continues without the ventilation func-
tion.
13.2 Setting options for the dishes
To cook the dishes perfectly, the appliance uses differ-
ent settings depending on the dish.
The display shows you the settings that are used. You
can adjust certain settings. Follow the instructions on
the display.
Note: The cooking result depends on the quality and
composition of the food. Use fresh and, ideally, chilled
food. Use frozen food straight from the freezer.
Tips and information about the settings
If you set a dish, the display shows relevant information
for this dish, e.g.:
¡ Suitable shelf position
¡ Suitable accessory or cookware
¡ Added liquid
¡ Time for turning or stirring
When this time is reached, a signal sounds.
To call up the information, press ​ ⁠ . Some notes are
displayed automatically.
Programmes
The ideal type of heating, temperature and cooking
time are preset for programmes.
To achieve an optimal cooking result, you must also
set the weight, thickness or the cooking level. You can
set the weight only in the intended range.
​ ⁠ to switch the appli-
​ ⁠ .
​ ⁠ , "Off" appears on the display.