Epson 826W - PowerLite WXGA LCD Projector Manuel de l'utilisateur - Page 22

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Epson 826W - PowerLite WXGA LCD Projector. Epson 826W - PowerLite WXGA LCD Projector 42 pages. Epson powerlite 85/825/826w
Également pour Epson 826W - PowerLite WXGA LCD Projector : Spécifications (6 pages), Manuel d'utilisation (47 pages), Installation rapide (4 pages), Manuel d'installation rapide (9 pages), Manuel de l'utilisateur (1 pages), Spécifications (2 pages), Bulletin d'information sur les produits (25 pages), Bulletin d'information sur les produits (12 pages), Manuel de démarrage (9 pages), Déclaration de conformité (4 pages), Liste des pièces (1 pages), Bulletin d'information sur les produits (22 pages), Liste des pièces (1 pages), Bulletin d'information sur les produits (28 pages), Bulletin d'information sur les produits (41 pages), Bulletin d'information sur les produits (38 pages), Bulletin d'information sur les produits (28 pages), Bulletin d'information sur les produits (15 pages), Bulletin d'information sur les produits (22 pages), Manuel d'installation (10 pages), Manuel d'installation (3 pages)

Imprimer la page
Epson 826W - PowerLite WXGA LCD Projector Manuel de l'utilisateur
Monitoring window layout
The icon patterns and their meanings are explained below.
Group
No warnings or problems
All projectors in the group are normal.
Warning or problem
A projector in the group has a warning or problem status.
Notification
A projector requiring immediate attention has been detected
within the group.
Monitoring disabled
The projector is not being monitored. If you right-click the icon and
select Monitoring enabled, the projector will be added to the
projectors that are being monitored.
Data being updated
Projector
No warnings or problems
Warning or problem
Notification
Monitoring disabled
Data being updated
*1
Projector
Network error (monitor password authentication error)
No Monitor Password was entered when the projector was
registered, or an incorrect Monitor Password was entered.s p.12,
p.15,
p.17
Network error (TCP connection error)
Network error (ESC/VP.net communication error)
*1 When Temperature level display group view is set to On at Environment
setup in the Tool menu, an icon indicating the internal temperature of the
projector will be displayed on top of the projector icon. The default setting
is Off. As you can get an idea of how the temperature inside the projector is
increasing when the temperature level is displayed, you can make
improvements to the projector's operating environment before a high
internal temperature error or high-temperature warning occur. s
*2 Check the following items.
- Check that the projector's power is turned on.
- Check that the LAN cable is connected.
- Check that Network Monitoring is set to ON or Standby Mode is set to
Network ON in the projector's configuration menu.
*3 Check that the projector has been correctly connected to the network.
The projector information that is generated when a problem is detected
is stored until EMP Monitor is closed. EMP Monitor displays will not be
updated automatically even if the projector status returns to normal.
Click "Refresh" in the main window to update the status.

Using the icons in Grouping view

The following icon operations can be carried out in Grouping view.
22
*2
*3
p.27