Siemens HB213AB 0 Series Manuel de l'utilisateur et instructions d'installation - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur et instructions d'installation pour {nom_de_la_catégorie} Siemens HB213AB 0 Series. Siemens HB213AB 0 Series 28 pages.

Siemens HB213AB 0 Series Manuel de l'utilisateur et instructions d'installation
en Shelf supports
Pull the whole rail to the front
2.
Clean the rail.
3.
→ "Cleaning products", Page 12
12.2 Attaching the shelf supports
Notes
¡ The rails only fit on the right or left.
¡ For both pull-out rails, ensure that you can pull them
forwards and out.
First, push the rail into the middle of the rear
1.
socket 
until the rail rests against the cooking
compartment wall, and then push this back
2.
Push the rail into the front socket
also rests against the cooking compartment wall,
and then press this downwards
12.3 Removing the pull-out rail
WARNING ‒ Risk of burns!
The shelf supports get very hot
Never touch the shelf supports when hot.
Always allow the appliance to cool down.
Keep children at a safe distance.
Note: If necessary, you can use pull-out rails on all
levels.
14
and remove it.
⁠ .
until the rail
⁠ .
3
4
Push on the tab marked PUSH behind the rail, and
1.
push the rail to the rear.
Keep the PUSH tab pushed back
2.
rail outwards
⁠ .
Pull the rail out towards the front until the retainer at
3.
the back unhooks.
Remove the pull-out rail.
4.
Clean the pull-out rail.
5.
→ "Cleaning products", Page 12
and swing the