Siemens HX9R3AE50 Manuel de l'utilisateur - Page 18
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Siemens HX9R3AE50. Siemens HX9R3AE50 44 pages.
Imprimer la page
NL
gas burners
A gas burners
In this chapter you can read how to set a cooking
Gas br other s
zone. In the table you will find cooking settings and
cooking times for different dishes.
Cleaning the burner cup and
burner lid
Clean the burner cover (1) and the burner cover (2) with
water and washing-up liquid. Dry these parts well.
Place the burner cup and lid back on the burner bowl
(5). Make sure that the ignition (3) and the flame
protection pin (4) are not damaged.
The nozzle (6) must be dry and clean. Always place the
burner cap exactly on the burner cup.
Ignite gas burner
Always place the burner cap exactly on the burner cup.
The openings of the burner chalice must always be free.
All parts must be dry.
Open the top cover of the cooker. This cover must
1.
always be open as long as the hob is in use.
Turn the switch of the desired burner
2.
counterclockwise to the ignition position
ignition begins.
Press the cooking zone knob all the way in and keep it
3.
pressed for 1-3 seconds. Gas begins to flow out and
the gas burner ignites.
The ignition protection has been activated. If the
gas flame goes out, the gas supply is automatically
interrupted by the ignition protection.
Set the desired flame size. Between the Off . setting
4.
~
the institution
the flame is not stable. You should
therefore always make a setting between the large
™
the little one
choose flame.
18
Check if the flame is burning. If not, repeat the
5.
process from step 2.
To end cooking, turn the cooking zone knob to the
6.
right to the
The cooking zone knob must not remain in the ignition
position for more than 15 seconds. If the burner has not
ignited after 15 seconds, wait at least one minute before
repeating the ignition process.
:
Warning – Attention!!
When you operate the switch shortly after switching off
a still warm gas burner, gas flows out. Do not turn the
cooking zone knob to the ignition position
•
, the gas supply will be turned off after 60 seconds
interrupted.
The gas burner does not ignite.
In the event of a power failure or damp spark plugs, you can
ignite the gas burner with a gas lighter or match.
Warnings
It is normal to hear a soft whistling sound while the
burner is operating.
It is normal for odors to be released the first time the
appliance is used. This means neither risk nor
malfunction. These disappear over time.
A flame with an orange color is normal. This is due
to the presence of dust in the environment, spilled
liquid, etc.
Should the burner flame accidentally go out, close the
burner control knob and wait at least 1 minute before
attempting to light it again.
A few seconds after the burner goes out, there is a
sound (pop). This is not a deviation, it means that the
safety is deactivated.
•.
The
Keep as clean as possible. If the spark plugs are dirty,
the ignition will be faulty. Clean these regularly with a
small non-metallic brush, taking into account that the
spark plugs should not be subjected to hard impacts.
Table - cooking
Select the correct pan size for each cooking zone. The
diameter of the bottom of the pan must correspond to
the size of the cooking zone.
Cooking times depend on the type, weight and quality
of the dishes. Therefore, deviations are possible. You
can best estimate the optimal preparation time yourself.
Use as little water as possible in the preparation, so that
vitamins and minerals are preserved. Choose short cooking
times so that vegetables remain firmer and have more
you
and
nutritional values.
~
and
you
Turn off.