Siemens FX-C Instructions de réparation - Page 11

Parcourez en ligne ou téléchargez le pdf Instructions de réparation pour {nom_de_la_catégorie} Siemens FX-C. Siemens FX-C 34 pages.

4.3

Control Module

El módulo electrónico consta de dos módulos, uno de display, y otro,

de potencia.

The function of the display module are:

►

Display the spin speed, the temperature, the rest time and the

start time preselection

►

Include the option buttons and the start/pause button.

The function of the control and power module are:

►

drive all the elements, with one relais the heating element and

with triacs the other elements (motor, valves and drain-pump).

►

evaluate the incoming signals of the NTC, tachogenerator and

pressure switch and

►

control of the programe.

The main characteristic is that the variant coding is made through the

programe selector and the buttons.

That means that all the modules are able to be coded.

The frecuency window of the module is: 45...76 Hz

Electrostatic sensitive devices!

Please observe handling regulations.

209_58300000115677_ara_en_f.doc – 26.03.08

4.4

The door lock is electromechanic, and it consist in a PTC, which is

heated when it receives tension and the inside wax is expanded and

blocks the door.

At the end of the wash, it is necessary to wait for a time before

opening the door

There are three cases in which the door keeps blocked:

►

It receives signal of movement fo the drum from the

tachogenerator.

►

If there is water level N1.

►

If the temperature is higher than 60º

Seite 11 von 34