Siemens Silver 1095 Instructions d'utilisation et d'installation - Page 30

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Siemens Silver 1095. Siemens Silver 1095 44 pages. Computer controlled slimline frontloader

Troubleshooting Minor Faults

Fault
The loading door cannot
be opened.
Detergent residue in the
detergent dispenser.
The gasket is crimped.
The belt gets off the pulley.
The program does not start.
,,
The Ready/Wash and
,,
Start/Pause indicator light
flash.
28
!
Risk of electric shock
Repairs must only be carried out by our
Customer Service or an authorized technician.
If repaires are needed, and assuming that you
cannot eliminate the fault yourself with the aid
the following table:
Turn the program selector to Off .
Disconnect the washing machine from the mains.
Turn off the water tap.
Call Customer Service.
Cause
There is water in the drum.
Safety function is active.
Detergent was damp or
lumpy.
This may appears after
installing the transport bolts.
Too much laundry is in the
drum or the laundry is put in
badly, and close the window
with excessive force.
Loading door not closed.
Action
Select Spin programme .
Wait for 2 minutes.
Clean and dry the detergent
dispenser(refer to Page 24)
Use the dispensing aid for liquid
detergent.
Remove the transport bolts, operate
the machine for a period of time,
the gasket will return to the original
shape.
Put in the laundry well and according
to the maximum load specifiction.
Check whether laundry is trapped
in door.
Close the loading door(a click
should be heard).
,,