Siemens SIWAMAT XT 750 Manuel d'instruction - Page 32
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Siemens SIWAMAT XT 750. Siemens SIWAMAT XT 750 40 pages.
Imprimer la page
Cleaning water inlet
strainers
Cleaning the strainer at the
water tap
Cleaning the strainer on the
washing machine
32
This is necessary if very little or no water flows into the
washing machine.
First release the water pressure in the supply hose:
Turn off the water tap.
Turn the programme selector to any programme
(except Spin 4" and Pumping").
Press the " button, and allow the programme to
run for approx. 40 seconds.
Disconnect the hose from the water tap.
Rinse the strainer under flowing water.
Reconnect the hose.
Disconnect the hose from the back of the washing
machine.
Pull out the strainer and rinse under running water.
Insert the strainer and reconnect the hose.
Turn on the water tap and check whether water is
still discharged. If water is still discharged, check
that the strainer is attached properly.
Turn off the water tap.