Siemens Washing machine Manuel d'instruction - Page 6

Removing the transportation protection

devices

Before the machine is used for the first time, all transportation protection devices

from the back of the appliance must be removed and stored for any later transport

(i.e., relocation)!

1 Remove the machine from the transport

base. Remove wedge

2 Remove the 4 screws

(Figure 2.1 ).

3 Remove transportation protection devices

C: Both bolts

are for this purpose

(Figure 2.2 ) remove with a 10 mm or 13

mm spanner (depending upon model).

Figure 1

( Figure 1 ).

with a screwdriver

Check to see that both plastic inserts on

the connecting carrier have also been

removed.

Refasten the screws

locations.

Both holes must be covered with the

caps provided

package) ( Figure 2.3 )!

Figure 2.1

Figure 2.2

Figure 2.3

at their original

(found in the accessories