Siemens Washing machine Manuel d'utilisation - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Siemens Washing machine. Siemens Washing machine 28 pages. Washing machine
Également pour Siemens Washing machine : Manuel d'installation et d'entretien (10 pages), Manuel d'utilisation (8 pages), Manuel d'instructions d'installation (6 pages), Manuel d'instruction et instructions d'installation (28 pages), Instructions de référence rapide (2 pages), Instructions de référence rapide (2 pages), Instructions de référence rapide (2 pages), Manuel d'instruction et instructions d'installation (28 pages), Manuel d'instruction (28 pages), Manuel d'instructions d'installation (6 pages), Manuel d'utilisation (10 pages), Instructions de référence rapide (2 pages), Manuel d'instruction (10 pages), Manuel d'instruction (10 pages)

Imprimer la page
Siemens Washing machine Manuel d'utilisation
en
Interrupting the programme
Set the main switch
Indicator lights extinguish.
If the hot water was switched ON or the
appliance has already heated up and then
the appliance door opened, leave the door
ajar for several minutes and then close.
Otherwise, the appliance door may fly
open due to expansion.
In order to resume the programme, set
the main switch to ON again.
Terminating the programme
(Reset)
Only when the main switch is on:
Rotate programme selector to the
Reset position.
The programme sequence lasts
approx. 1 min.
When the programme has run,
switch off the main switch
To restart, rotate the programme selector
to the required programme. Switch on
3
the main switch
1
sequence starts automatically.
Changing the programme
It is possible to change the programme
within 2 minutes after you have switched
the dishwasher on.
Should it be necessary to change the
programme after this period, the
programme cycle that has already been
begun (e.g. washing) will be completed
first of all.
Note
If the power supply is disconnected while
the appliance is operating, e.g. by
switching off the appliance or due
to a power failure, all settings remain
stored. Operation continues automatically
as soon as the power supply is restored.
16
to OFF.
1
.
1
. The programme

Additional functions *

*
on some models additional functions
can be set with the buttons.
4
Pre-Soak *
The Pre-Soak programme option serves to
perform a pre-soak cycle before the main
programme. This cycle enables cookware,
e.g. pans, bowls, etc. to be pre-soaked
and pre-rinsed in the lower rack. If you
wish to pre-soak the dishes, this
programme option must be selected by
pressing the "Pre-Soak" button before the
programme starts. The recommended
detergent amount is approx. 5 g poured
onto the inside of the door.
Time reduction/ time saving *
Pressing the "Time reduction/time saving"
button provides a short wash cycle by
curtailing the drying phase and the
washing time. The washing and drying
performance will be reduced with the Time
reduction/time saving programme option.
Half load*
If you have only a few items to wash (e.g.
glasses, cups, plates), you can switch to
"Half load". The "half load" additional
function saves water, energy and time. It is
recommended to put a little less detergent
in the detergent dispenser than for a full
load.
Extra dry*
If you press the "Extra dry" button, you
will receive a higher temperature in all
programmes in the final rinse and
therefore an improved drying result.
(please note that higher temperatures
might have an effect on delicate items).