Siemens WU P Series Manuel d'instruction et instructions d'installation - Page 36
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction et instructions d'installation pour {nom_de_la_catégorie} Siemens WU P Series. Siemens WU P Series 40 pages.
Imprimer la page
Faults and what to do about them
en
Faults
Detergent/fabric softener
drips off the seal and col-
lects on the door or in the
seal fold.
Loud noises, vibrations
and appliance "move-
ment" during the spin
cycle.
The Touch-Display indica-
tor lights do not work
while the appliance is run-
ning.
There is detergent resi-
due on the laundry.
If you cannot rectify a fault yourself (after switching the appliance off and on again) or a repair is required:
Switch off the appliance and pull out the mains plug.
■
Turn off the tap and call customer services.
■
36
Cause/Remedy
There is too much detergent/fabric softener in the dispensers. Do not fill above
the max. mark in the dispensers.
Is the appliance aligned? ~ "Alignment" on page 17
■
Are the appliance's feet fixed? Secure the appliance's feet.
■
Have the transport locks been removed? ~ "Removing the transport
■
locks" on page 14
Has there been a power failure?
■
Have the fuses blown? Reset/replace the fuses.
■
If the fault occurs repeatedly, call customer services.
■
Some phosphate-free detergents contain water-insoluble residue.
■
Select Rinse or brush the laundry after washing.
■