Siemens XQG80-WM10P1601W Manuel d'instruction et instructions d'installation - Page 19
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction et instructions d'installation pour {nom_de_la_catégorie} Siemens XQG80-WM10P1601W. Siemens XQG80-WM10P1601W 40 pages.
Également pour Siemens XQG80-WM10P1601W : Manuel d'instruction et instructions d'installation (34 pages)
Imprimer la page
Individual settings
en
0
Individual settings
0 (Spin speed)
I n d i v i d u a l s e t t i n g s
0: The spin speed can be changed
before and during the programme (in
rpm, revolutions per minute) depending
on the progress of the programme.
Setting - - - - (Rinse stop = without final
drain/spin cycle), laundry remains in the
water after the last rinse cycle.
Setting 0 (Without any spin cycle), drain
the rinsing water only, no spin cycle.
The maximum spin speed depends on
the programme and model.
Overview of programmes
û (Finish in)
Delays the Finish in time (end
of programme).
When you select a programme,
Note:
the respective programme duration is
displayed. The finish-in time indicates
when the programme will be finished. It
can be set in hour increments up to a
maximum of 24h. Press and hould the
û (Finish in) button until the
required number of hours is shown
(h=hour). Select
I (Start/
Pause).
19