Cisco 7925G-EX Manuel d'installation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Cisco 7925G-EX. Cisco 7925G-EX 12 pages. Wavelink avalanche management console
Également pour Cisco 7925G-EX : Fiche technique (8 pages), Notes de mise à jour (16 pages), Manuel des accessoires (20 pages), Manuel d'administration (19 pages), Manuel de l'utilisateur (10 pages), Manuel de l'utilisateur (16 pages), Manuel d'administration (23 pages), Manuel d'installation (21 pages), Manuel d'administration (14 pages)

Phone Installation

c) Click Install the Software automatically (Recommended) and click Next.

d) After a few moments, the Cannot Install This Hardware dialog box appears. Click Don't prompt me

again to install this software.

e) Click Finish to close the dialog box.

Step 4

Monitor the indicator light after the phone briefly displays USB Connected on the status line.

While the battery is charging, the indicator light is red. When the battery is fully charged, the indicator light

turns green.

After Battery Is Charged

After charging the battery, you must turn on the phone to make and receive calls.

Tip

Your idle phone screen can turn off after a time interval. To alert you that the phone is still turned on and

connected to the wireless network when using battery power, the indicator light flashes green every 2 seconds.

Power On Phone

Procedure

Step 1

Press and hold the

Step 2

You might need to enter a username and password to access the wireless network.

After completing authentication and registration with Cisco Unified Communications Manager, the phone

displays the main screen and is ready to place or receive calls.