Cisco 7925G-EX Manuel d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Cisco 7925G-EX. Cisco 7925G-EX 21 pages. Wavelink avalanche management console
Également pour Cisco 7925G-EX : Fiche technique (8 pages), Notes de mise à jour (16 pages), Manuel des accessoires (20 pages), Manuel d'administration (19 pages), Manuel de l'utilisateur (10 pages), Manuel de l'utilisateur (16 pages), Manuel d'administration (23 pages), Manuel d'installation (12 pages), Manuel d'administration (14 pages)

Imprimer la page
Cisco 7925G-EX Manuel d'installation

Cisco Unified Communications Manager Phone Addition Methods

Related Topics
Verify Wireless Voice Network
Feature Support
Wireless LAN
Cisco Unified Communications Manager Phone Addition Methods, on page 2
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Installation, on page 8
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Startup, on page 17
Cisco Unified Communications Manager Phone Addition Methods
Before installing the wireless IP phone, you must choose a method for adding phones to the
Cisco Unified Communications Manager database. Some methods require entering the MAC address of the
phone. The following table provides an overview of these methods.
Table 1: Phone addition methods for the Cisco Unified Communications Manager Database
Method
Autoregistration
Autoregistration with
the Tool for
Auto-Registered
Phones Support
(TAPS)
BAT
Cisco
UnifiedCommunications
Manager
Administration only
The following sections describe methods for adding phones.

Autoregistration Phone Addition

Use autoregistration to enter phones into the Cisco Unified Communications Manager database without first
gathering MAC addresses from the phones. When autoregistration is enabled, Cisco Unified Communications
Manager automatically assigns the next available sequential directory number (DN) to new phones during
the initial phone startup process.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
2
◦ Either Cisco Unified Communications Manager Release 4.3 or later, or
Cisco Unified Communications Manager Express Release 4.3 or later
◦ IP network configured to support DHCP or manual assignment of IP address, gateway, and subnet
mask
Requires MAC address?
No
No
Yes
Yes
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Setup
Notes
Results in automatic assignment of directory numbers
Requires autoregistration and Bulk Administration Tool
(BAT); updates information in the Cisco Unified IP
Phone and in Cisco Unified Communications Manager
Administration
Allows for simultaneous registration of multiple phones
Requires phones to be added individually