Wavelink Avalanche Server
Install CU File
The CU file is provided by Cisco in the .ava file format.
Note
Install the CU on the Wavelink Avalanche Management Console.
For more information, see the Wavelink Avalanche Management Console documentation.
To install the phone CU, follow these steps.
Procedure
Step 1
Launch the Wavelink Avalanche Management Console and connect to the agent.
Step 2
Choose Software Management > Install Software Package.
Step 3
Browse to the location of the .ava file containing the CU and select it.
Step 4
Click New and enter the software collection name under which the phone configuration files will be added.
Step 5
Follow the instructions on the wizard to complete the installation.
Step 6
When the installation completes, expand the software collection name on the left pane. The phone CU file
name 7925CU appears with a red "x" (disabled) next to it.
Step 7
Right-click 7925CU and choose Enable Package.
Note
Step 8
Right-click the software collection (containing the phone CU) and choose Settings.
Step 9
Click the button at right of the Selection Criteria box to launch the Selection Criteria wizard.
Step 10 Select an item from the Source Properties list on the left, and enter a value in the Selection Expression text
box.
Step 11 Repeat the previous step for each property and value you wish to include. When finished, click Compile, and
then click Test Expression.
Step 12 Review the list displayed under Matching Clients to ensure the selection criteria have been met.
Step 13 Click Apply, then click OK.
Update Configuration Files
You can update a phone configuration file using the CU installed on a Wavelink Avalanche Management
Console.
The following table lists the configuration file settings.
The installation is complete. The following additional steps are optional. They configure the selection
criteria so you can easily apply changes to a device group.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
Install CU File
5
Imprimer la page