Samsung U32J590UQ Series Manuel de l'utilisateur - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Samsung U32J590UQ Series. Samsung U32J590UQ Series 48 pages.
Également pour Samsung U32J590UQ Series : Manuel de l'utilisateur (48 pages), Manuel de l'utilisateur (48 pages), Manuel de l'utilisateur (50 pages), Manuel de l'utilisateur (48 pages)

Installing a Wall-mount Kit or Desktop Stand

― Power the product off and remove the power cable from the power socket.

Attach the wall-mount kit or desktop stand here.

Attach the INLAY to the position as shown in the figure.

Bracket (sold separately)

Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding

parts on the wall-mount kit or desktop stand you want to attach.

•

Notes

‒ Using a screw longer than the standard length can damage the internal components of the

product.

‒ The length of screws required for a wall mount that does not comply with the VESA standards

may vary depending on the specifications.

‒ Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit

or desktop stand using excessive force. The product may get damaged or fall and cause personal

injury. Samsung shall not be held liable for any damage or injury caused by using improper

screws or attaching the wall-mount kit or desktop stand using excessive force.

‒ Samsung shall not be held liable for any product damage or personal injury caused by using a

wall-mount kit other than the one specified or from an attempt to install the wall-mount kit on

your own.

‒ To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10

cm or farther away from the wall.

‒ Be sure to use a wall-mount kit that complies with the standards.

‒ To install the monitor using a wall mount, disconnect the stand base from the monitor.

Model name

VESA screw hole specs (A * B)

in millimeters

U32J590UQ* / U32J592UQ* 100.0 x 100.0 (3.9 x 3.9)

― Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to

electric shock.

Unit: mm (inches)

Standard Screw

Quantity

4.0 mm Φ, 0.7 pitch * 10.0

4 EA

mm long