Samsung XL30 - SyncMaster - 30" LCD Monitor Manuel de démarrage rapide - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Samsung XL30 - SyncMaster - 30" LCD Monitor. Samsung XL30 - SyncMaster - 30" LCD Monitor 14 pages. User manual (korean)
Également pour Samsung XL30 - SyncMaster - 30" LCD Monitor : Manuel de démarrage rapide (16 pages), Manuel du propriétaire (34 pages), (coréen) Manuel de l'utilisateur (35 pages)

Imprimer la page

LED is blinking but no

images on the screen.

There are only 16

colors shown on the

screen.

The screen colors

have changed after

changing the video

card.

I cannot use the

2560x1600 resolution

with the monitor.

Check the following items if there is trouble with the monitor.

1. Check if the power cord and the video cables are properly connected to the computer.

2. Check if the computer beeps more than 3 times when booting.

(If it does, ask the service center to check the main board of the computer.)

3. If you installed a new video card or if you assembled the PC, check if the installed the adapter

(video) driver.

4. Check if the scanning ratio of the video screen is set at 60 Hz +/- 2 Hz.

(Do not exceed 60 Hz when using the maximum resolution.)

5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode,

remove the Display Adapter at the "Control Panel→System→Device Administrator" and then

reboot the computer to reinstall the adapter (video) driver.

If problems repeatedly occur,

Q & A

Question

How can I change the

frequency?

How can I adjust the resolution?

How can I set the Power Saving

function?

How can I clean the outer

case/LCD Panel?

Is the frequency properly

adjusted when checking the

Display Timing on the menu?

Have the Windows colors

been set properly?

Has the video card been set

properly?

Does the graphics card on

your computer support the

2560x1600 resolution?

contact an authorized Service

The frequency can be changed by reconfiguring the video card.

Note that video card support can vary, depending on the version

of the driver used. (Refer to the computer or the video card

manual for details.)

Windows ME/XP/2000 : Set the resolution at the Control

Panel→Display→Settings.

* Contact the video card manufacturer for details.

Windows ME/XP/2000 : Set the function at BIOS-SETUP of the

computer or the screen saver. (Refer to Windows/Computer

Manual).

Disconnect the power cord and then clean the monitor with a soft

cloth, using either a cleaning solution or plain water.

Do not leave any detergent or scratches on the case. Do not let

any water enter the monitor.

Adjust the frequency properly by

referring to the video card manual

and

Preset Timing

Modes.

(The maximum frequency per

resolution may differ from product to

product.)

Windows ME/2000/XP :

Set the colors properly at the

Control Panel → Display →

Settings.

Set the video card by referring to the

video card manual.

If your graphics card does not support the

2560x1600 resolution, then you can only

use the 1280x800 resolution with your

monitor.

To use the 2560x1600 resolution, replace

your graphics card with one that supports

that resolution.

Center.

Answer