Siemens SKB60 Manuel - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Siemens SKB60. Siemens SKB60 32 pages. Auxiliary switch
Également pour Siemens SKB60 : Instructions de montage (6 pages), Instructions de montage (10 pages), Instructions de montage (7 pages), Instructions de montage (6 pages), Instructions de montage (10 pages), Instructions de montage (4 pages)

The LED on the SKB62/MO cable adapter flashes red during the calibration, as the

positioning signal Y and the positioning feedback U do not correspond anymore. This is

interpreted as a blockage and thus indicated as an error.

If necessary, the calibration can be repeated any number of times.

LED indication of operational status

SKB60, SKB62.., SKB62/MO

The dual-colored LED indicating the operational status is visible when the cover is removed.

LED

indication

Lit green

Flashing green

Lit red

Flashing red

As a general rule, the LED can only assume the states shown above – continuously lit red or

green, flashing red or green, or off/dark.

Siemens

Smart Infrastructure

Function

Normal operation

Stroke calibration in progress

Faulty stroke calibration

Internal error

Inner valve jammed

No power supply

Dark

Electronics faulty

Remarks, troubleshooting

Automatic operation; everything o.k.

Wait until calibration is finished

(LED stops flashing, will be lit green or red)

Check mounting; restart stroke calibration (by short-circuiting

calibration slot)

Replace electronics

Troubleshoot, check valve, restart stroke calibration

Check mains network, check wiring

Replace electronics

CM1N4564en

2023-10-17