Siemens IQ 100 Manuel d'instruction - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Siemens IQ 100. Siemens IQ 100 12 pages.
Également pour Siemens IQ 100 : Instructions d'utilisation et d'installation (43 pages), Manuel (8 pages), Manuel d'instructions pour l'installation et l'utilisation (16 pages), Manuel de référence rapide (2 pages)
Imprimer la page
Cleaning and maintenance
en
Removing and installing the filter
The filter must be serviced regularly in order to
guarantee efficient filtration of odours and grease.
Metal grease filter
The metal grease filters should be cleaned every 30
operating hours or at least once a month.
:
Warning – Risk of fire!
Grease deposits in the grease filter may catch fire.
Clean the grease filter at least once a month.
Never operate the appliance without the grease filter.
Activated charcoal filter (only in circulating-air mode)
In order to guarantee efficient odour filtration, the filter
must be serviced regularly.
The activated charcoal filters must be replaced at least
every 4 months.
Notes
The activated charcoal filters are not included in the
■
delivery. The activated charcoal filters can be
obtained from specialist retailers, from our after-
sales service or from the Online Shop.
The activated charcoal filters cannot be cleaned or
■
reactivated.
Removing metal grease filter
The metal grease filters filter the grease out of kitchen
steam. To keep them in good working order, the filters
should be cleaned at least once a month.
Open the lock on the metal grease filters and
1.
remove the filters from the retainer.
Notes
– When you do this, take hold of the metal grease
filters from underneath with your other hand.Make
sure that the metal grease filters do not fall and
damage the hob.
– Fat may accumulate in the bottom of the metal
grease filters. Hold the filters level to prevent fat
from dripping out.
Clean the metal grease filters.
2.
Clean the inside of the appliance.
3.
Cleaning the metal mesh grease filters
Notes
Do not use any aggressive, acidic or alkaline
■
cleaning agents.
When cleaning the metal mesh grease filters, also
■
clean the holder for the metal mesh grease filters in
the appliance using a damp cloth.
The metal mesh grease filters can be cleaned in the
■
dishwasher or by hand.
8
By hand:
You can use a special grease solvent for
Note:
stubborn dirt. It can be ordered via the Online Shop.
Soak the metal mesh grease filters in a hot soapy
■
solution.
Clean the filters with a brush and then rinse them
■
thoroughly.
Leave the metal mesh grease filters to drain.
■
In the dishwasher:
If the metal mesh grease filters are cleaned in the
Note:
dishwasher, slight discolouration may occur. This has
no effect on the function of the metal mesh grease
filters.
Do not clean heavily soiled metal mesh grease filters
■
together with utensils.
Place the metal mesh grease filters loosely in the
■
dishwasher. The metal mesh grease filters must not
be wedged in.
Installing the metal mesh grease filter
Insert metal grease filter.
1.
Fold up metal grease filter and engage the lock.
2.
Make sure that the filter lock engages properly.
Note:
Changing the activated charcoal filter (only in
circulating-air mode)
In order to guarantee efficient odour filtration, the filter
must be serviced regularly.
The activated charcoal filters must be replaced at least
every 4 months.
Notes
The activated charcoal filters are not included in the
■
delivery. The activated charcoal filters can be
obtained from specialist retailers, from our after-
sales service or from the Online Shop.
The activated charcoal filters cannot be cleaned or
■
reactivated.
Remove the metal grease filters; see above.
1.
Turn the old activated charcoal filters and pull them
2.
out of the retainer. ¨
Push the new activated charcoal filters into the
3.
retainer and turn. ©
Fit the metal grease filters; see above.
4.