Siemens SN 65E001 Manuel d'utilisation - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Siemens SN 65E001. Siemens SN 65E001 28 pages.

Imprimer la page

Waste water pump

Large food remnants in the rinsing water

not retained by the filters may block the

waste water pump. The rinsing water is

then not pumped out and covers the filter.

In this case:

First disconnect the appliance from the

power supply.

Remove the filters

Scoop out water, use a sponge

if required.

Using a spoon, prise off pump cover

(as illustrated) until it clicks, then grip

the cover by the lug and first pull it

upwards until it resists and then pull

it out forwards.

Check inner compartment and remove

any foreign objects.

Place cover in the original position,

press down and engage.

Install filters.

Troubleshooting

Experience has shown that you can rectify

most faults which occur in daily operation

without calling customer service.

Obviously this will save on costs and

ensure that the machine is quickly

available again. The following overview

should help you locate the causes of faults

which may occur.

Warning

Remember: Repairs may be carried out by

technicians only. If a component has to be

replaced, ensure that only original spare

parts are used. Improper repairs or use

of non-original spare parts may cause

considerable damage and put the user

at considerable risk.

... when the appliance is

switched on

The appliance does not start.

The mains fuse has tripped.

The appliance plug has not been

inserted.

The appliance door has not been

shut properly.

... on the appliance

Lower spray arm rotates sluggishly.

Spray arm blocked.

The door is difficult to open. *

Child-proof lock is activated.

The deactivation instructions are

at the back in the envelope.

* depending on model

Door cannot be closed.

Door lock has been activated.

To reset, close the door with

greater force.