Siemens SN23E831TI Manuel d'utilisation - Page 38

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Siemens SN23E831TI. Siemens SN23E831TI 40 pages.

Installation and connection

Removing the appliance

Also observe

the sequence of worksteps here.

1. Disconnect the appliance from

the power supply.

2. Turn off the water supply.

3. Undo the waste water and drinking

water connection.

4. Loosen fastening screws for

the furniture parts.

5. If fitted, remove the base panel.

6. Pull out the appliance, carefully

pulling the hose behind.

Empty the dishwasher and secure loose

parts.

Drain the appliance according

to the following steps:

1. Turn on the tap.

2. Close the door.

3. Switch on ON/OFF switch (.

4. Select programme with the highest

temperature.

5. Press START button @.

Programme sequence starts.

6. After approx. 4 minutes press

the START button @ until all

displays go out.

After approx. 1 min. the appliance is

completely drained.

7. Switch off ON/OFF switch (.

8. Turn off the tap, disconnect supply

hose and drain water.

Transport appliance upright only.

(This prevents residual water from

running into the machine control

and damaging the programme

sequence.)

Protection against frost

If the appliance is in a room where there

is a risk of frost (e.g. holiday home),

empty the appliance completely (see

Transportation).

P r o t e c t i o n a g a i n s t f r o s t ( E m p t y i n g t h e a p p l i a n c e )