Siemens SP Series Manuel d'instruction - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Siemens SP Series. Siemens SP Series 42 pages.

Setting

The amount of salt dispensed can be

set in 4 stages

depending on the hardness of your

water. Accordingly 0, 1, 2 or 3 displays

are lit (see table). Factory setting: 1.

1. Find out about the hardness

value of your tap water. Your water

utility company will help you with this.

2. Setting can be found in the water

hardness table.

3. Close the door.

4. Switch on ON/OFF switch (.

The Cleaning display )* flashes.

Water softening system/Special salt

5. Press and hold down the START

button @.

6. Rotate programme selector 8 until

the salt refill indicator ` flashes.

7. Release button.

The salt refill indicator ` flashes

and the display "Check water

supply" h are lit (= Setting 1).

To change the setting:

1. Rotate programme selector 8 until

the required setting has been

selected.

2. Press START button @.

The salt refill indicator ` goes out.

The selected setting is saved.