Delivery
Your dishwasher has been checked
thoroughly in the factory to ensure that it
is in working order. This may cause
small water stains. These will disappear
after the first wash cycle.
Technical specifications
Weight:
max. 60 kg
Voltage:
220–240 V, 50 Hz or 60 Hz
Connected load:
2.0–2.4 kW
Fuse:
10/16 A (UK 13A)
Power input:
switched off 0.1 W
not switched off 0.1 W
Water pressure:
at least 0.05 MPa (0.5 bar), maximum
at least 0.05 MPa (0.5 bar), maximum
at least 0.05 MPa (0.5 bar), maximum
1 MPa (10 bar). At a higher water
1 MPa (10 bar). At a higher water
1 MPa (10 bar). At a higher water
pressure: connect pressure-reducing
pressure: connect pressure-reducing
pressure: connect pressure-reducing
valve ahead.
Inlet rate:
minimum 10 litres/minute
minimum 10 litres/minute
minimum 10 litres/minute
Water temperature:
Water temperature:
Water temperature:
cold water; hot water max. temperature
cold water; hot water max. temperature
cold water; hot water max. temperature
60 °C.
Installation and connection
Installation
The required installation dimensions can
be found in the installation instructions.
Level the appliance with the aid of the
height-adjustable feet. Ensure that the
appliance is situated securely on the
floor.
A built-under or integrated appliance
which is installed subsequently as a
free-standing appliance must be
secured to prevent it from
overturning, e.g. by screwing it to the
wall or by installing it under
a continuous worktop which is
a continuous worktop which is
a continuous worktop which is
screwed to adjacent cupboards.
screwed to adjacent cupboards.
screwed to adjacent cupboards.
The appliance can easily be
The appliance can easily be
The appliance can easily be
installed in a fitted kitchen between
nstalled in a fitted kitchen between
nstalled in a fitted kitchen between
wooden and plastic walls.
wooden and plastic walls.
wooden and plastic walls.
Waste-water connection
Waste-water connection
Waste-water connection
1.
1.
1. The required work sequence can be
The required work sequence can be
The required work sequence can be
found in the installation instructions.
If required, fit a siphon with an
drainage connection.
2. Connect the waste-water hose to the
drainage connection of the siphon
with the enclosed parts.
Ensure that the drainage hose is not
kinked, crushed or twisted and that
there is no cover plate in the
drainage to prevent the waste water
from flowing out!
Fresh water connection
1. Connect the fresh-water connection
to the tap according to the
installation instructions with the
enclosed parts.
Ensure that the fresh-water
connection is not kinked, crushed or
twisted.
2. When replacing the appliance,
always use a new water supply hose.
en
37
Imprimer la page