Epson BrightLink 475Wi Manuel d'installation

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Epson BrightLink 475Wi. Epson BrightLink 475Wi 2 pages. Lamp and status information
Également pour Epson BrightLink 475Wi : Commencer ici Manuel (6 pages), Manuel d'utilisation (47 pages), Manuel de connexion (6 pages), Manuel d'installation (5 pages), Gabarit de montage (5 pages), Spécifications (6 pages), Déclaration de conformité (4 pages), Dessin dimensionnel (3 pages), Spécifications (6 pages), Manuel d'installation (3 pages), Manuel d'installation (5 pages), Manuel de démarrage rapide (6 pages), Commencer ici Manuel (6 pages)

Epson BrightLink 475Wi / 480i / 485Wi

Projector Light Status

The lights on the projector's control panel indicate the projector status and let you know when a problem

occurs. Check the status and color of the lights and look for a solution in the table below.

Power light

Lamp light

Temperature light

Power light

Green

Flashing green

Orange

Flashing orange Off

Flashing red

Lamp light

Temperature

light

Off

Flashing orange

INSTALLATION HANDBOOK

Status and solution

Normal operation.

Warming up. Wait for an image to appear.

Standby or sleep mode.

Preparing network monitoring or shutting down.

(Wait for the light to remain orange before

unplugging the projector.)

Projector is too hot.

• Make sure that the vents and air filter are not

clogged with dust or obstructed by nearby

objects.

• Make sure the environmental temperature is not

too hot.

• If overheating continues, replace the air filter.

Lamp and Status Information