Siemens SX76M091GB/22 Manuel d'utilisation - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Siemens SX76M091GB/22. Siemens SX76M091GB/22 44 pages.

Water softening system/Special salt

Using special salt

Always refill with special salt

immediately before switching on the

appliance. This ensures that overrun

special salt solution is immediately

washed out and does not corrode the

rinsing tank.

1. Open the screw-type cap of the

compartment 1R.

2. Fill the tank with water (only required

when switching on the appliance for

the first time).

3. Then add dishwasher salt (not table

salt or tablets).

The water is displaced and runs out.

As soon as the salt refill indicator @

on the fascia is lit, top up the salt.

* depending on model

Using detergents with salt

component

D e t e r g e n t s w i t h s a l t c o m p o n e n t

If combined detergents with a salt

component are used, salt can usually be

omitted up to a water hardness of

21° dH (37° fH, 26° Clarke, 3.7 mmol/

l). If the water hardness is over 21° dH,

special salt must be used.

Switching off salt refill

indicator/water softening

S w i t c h i n g o f f w a t e r s o f t e n i n g s y s t e m

If the salt refill indicator @ is impaired

(e.g. when using combined detergents

containing salt component), it can be

switched off.

Proceed as described under

■

system" and set the value to •:‹‹.

"Adjusting the water softening

The water softening system and salt

refill indicator are now switched off.

Caution

Never fill the salt dispenser with

detergent. You will destroy the water

softening system.