Siemens BE Series Manuel d'instructions pour l'installation et l'utilisation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour l'installation et l'utilisation pour {nom_de_la_catégorie} Siemens BE Series. Siemens BE Series 20 pages.

Imprimer la page
Empty pans or those with a thin base
Do not heat empty pans, nor use pans with a thin base. The
hob is equipped with an internal safety system. However, an
empty pan may heat up so quickly that the "automatic switch
off" function may not have time to react and the pan may reach
very high temperatures. The base of the pan could melt and
damage the glass on the hob. In this case, do not touch the
pan and switch the hotplate off. If it fails to work after it has
cooled down, please contact the Technical Assistance Service.

Getting to know your appliance

The instruction manual is the same for various different hobs.
An overview of the models with their dimensions is given on
page 2.

The control panel

Control panels
Main switch
#
Selecting the hotplate
¸
Selecting settings
/
A
@
Powerboost function
›
Time program function
0
Childproof lock
‚

The hotplates

Hotplate
Single hotplate
$
Use only cookware suitable for induction cooking; see the section on suitable cookware.

Residual heat indicator

The hob has a residual heat indicator for each hotplate to show
those which are still hot. Avoid touching them when this
indicator is lit.
Pan detection
Each hotplate has a minimum limit for detecting pans, which
varies depending on the material of the pan being used. You
should therefore use the hotplate that is most suitable for the
diameter of your pan.
Indicators
‹
‚
-
Š
›
/
•
œ
‹‹
Control panels
Pressing a symbol activates its corresponding function.
Note: Always keep the control surfaces dry. Moisture can affect
proper working.
Turning on and off
Always use cookware of a suitable size.
Although the hob is switched off, the indicator
remain on for as long as the hotplate is hot.
If the pan is removed before the hotplate is turned off, the
indicator
œ
alternately.
Functionality
Power levels
Powerboost function
Residual heat
Time program function
or
•
and the selected power level will appear
or
will
œ
•
11