Cisco 7942G - Unified IP Phone VoIP Manuel - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Cisco 7942G - Unified IP Phone VoIP. Cisco 7942G - Unified IP Phone VoIP 11 pages. Unified communications manager 9.0 (sccp and sip)
Également pour Cisco 7942G - Unified IP Phone VoIP : Manuel de l'utilisateur (23 pages), Fiche technique (5 pages), Manuel d'installation (12 pages), Manuel de l'utilisateur (6 pages), Manuel de l'utilisateur (4 pages), Manuel d'administration (12 pages), Manuel de l'utilisateur (13 pages), Manuel de l'utilisateur (17 pages), Manuel de l'utilisateur (12 pages), Manuel de l'utilisateur (16 pages), Manuel de l'utilisateur (6 pages), Manuel d'administration (16 pages), Dépannage et maintenance (27 pages)

continue with its normal start-up process and will not reset.

Registering Phone

UAD Settings

STEP ONE: PBXware IP address.

1. Find out the IP address of PBXware server.

STEP TWO: Login to PBXware.

1. Open a new browser window and enter the IP address to access the PBXware administration

interface login screen.

Example: http://192.168.1.2

2. Hit "Enter" on your keyboard.

3. Login to PBXware with your e-mail address and password.

STEP THREE: UAD status.

1. Make sure the UAD is enabled. To check the UAD status navigate to "Settings:UAD", and click

on the "edit" icon corresponding to "Cisco 7942G".

2. Make sure the "Status" is set to "active", "Auto provisioning" is set to "No" and "DHCP" is set

to "Yes".

3. Click on the "Save" button to save changes.