Siemens EF6..TN Series Manuel d'instruction - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Siemens EF6..TN Series. Siemens EF6..TN Series 16 pages.
Également pour Siemens EF6..TN Series : Manuel d'instruction (12 pages)
Imprimer la page
Setting procedure
Touch the
symbol repeatedly until the
0
1.
kitchen timer lights up.
‹‹
Touch the + or - symbol. The default value appears. +
2.
symbol: 10 minutes - symbol: 05 minutes.
Use the + or - symbol to set the time.
3.
The timer starts counting down after a few seconds.
Automatic time limit
If a hotplate is in use for a long time without the setting being
changed, the automatic time limit is activated.
The hotplate stops heating.
hotplate indicator.
Control panel pause
If you wipe over the control panel while the hob is switched on,
settings may be altered.
To prevent this from happening, your hob has a control panel
pause function. Touch the
Basic settings
Your appliance has various basic settings. You can adapt these
settings to your needs.
Indicator
Function
Shortening the childproof lock switch-on time
™‚
‹
Switched off.*
Switched on.
‚
Audible signal
™ƒ
Confirmation signal and operation error signal are switched off.
‹
‚
Only the operation error signal is switched on.
Confirmation signal and operation error signal are switched on.*
ƒ
Automatic timer
™...
-
Decreased.
‚
ƒ
Basic setting.
„
Increased.
...
Š
Automatic timer
™†
Switched off.
‹
-
Cooking time, after which the hotplates switch off
‚
ŠŠ
Duration of the timer end signal
™‡
10 seconds.*
‚
30 seconds
ƒ n
1 minute.
„
*Basic setting
indicator for the
W
lights up on the timer display.
and
flash alternately in the
"
‰
symbol. A signal sounds. The
#
When the time has elapsed
A signal sounds once the time has elapsed.
the timer display. The
indicator for the kitchen timer lights up
W
brightly. After 10 seconds, the indicator switches off.
Changing the time
Touch the
symbol repeatedly until the
0
kitchen timer lights up. Use the + or - symbol to set the time.
Switch off the hotplate and then make your settings again.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
control panel is locked for 30 seconds. You can now wipe over
the control panel without altering any settings.
‹‹
lights up on
indicator for the
W
13