Cisco 7945 Series Référence rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Référence rapide pour {nom_de_la_catégorie} Cisco 7945 Series. Cisco 7945 Series 5 pages. Ip phone and voice mail
Également pour Cisco 7945 Series : Manuel de l'utilisateur (6 pages), Manuel de l'utilisateur (4 pages), Manuel de l'utilisateur (8 pages), Manuel de référence rapide (6 pages), Manuel d'utilisation rapide (2 pages), Manuel de l'utilisateur (3 pages), Manuel de l'utilisateur (2 pages), Manuel de référence rapide (8 pages), Manuel de formation des utilisateurs (2 pages), Manuel de l'utilisateur (6 pages), Manuel de démarrage rapide (4 pages), Manuel de démarrage rapide (30 pages), Manuel de référence rapide (7 pages), Manuel d'installation (1 pages), Manuel de référence rapide (3 pages), Manuel de l'utilisateur (2 pages), Référence rapide (2 pages), Manuel de l'utilisateur (2 pages), Manuel de référence rapide (2 pages), Manuel de référence rapide (2 pages), Instructions (3 pages), Manuel de démarrage rapide (2 pages), Manuel (5 pages), Pour commencer (2 pages)

Imprimer la page

City University VoIP Quick Reference

Cisco IP Phone 7945, 7971 - 7975

Mute the microphone

during a call

Pick a call up from

any extension within

your pick-up group

Transfer a call

Transfer a call to

boss line

(Applicable to the 7960

series)

Place a conference

call

Answer a call using

call waiting

(Applicable to the IP

phone with call waiting

feature enabled)

Change ring type

Computing Services Centre, CityU

 Press the

button (dimmed) to toggle Mute on.

 Press the

button (Red) to toggle Mute off

 To pickup a call from an extension within your pick-up group:

Uplift the handset of your phone or press a

Press the more soft key until the Pickup soft key is shown.

Press the Pickup soft key to transfer the call to your extension.

 To transfer a call:

1. Press the more soft key if necessary until the Transfer soft key is shown.

2. Press the Transfer soft key. This places the call on hold (Press the EndCall

soft key and then the Resume soft key to return to the original call).

3. Press a 4-digit internal extension number to transfer the call to this internal

extension.

4. When it rings on the other end, press the Transfer again.

5. Hang up if handset is used.

 To transfer a call to the boss line:

1. Press the more soft key if necessary until the Trnsfer soft key is shown.

2. Press the Transfer soft key. This places the call on hold (Press the EndCall

soft key and then the Resume soft key to return to the original call).

3. Dial '' and the 4-digit internal extension number of the boss.

4. When it rings on the other end, press the Transfer again.

5. Hang up if handset is used.

 During a call, to place a conference call:

Press the more soft key until the Confrn soft key is shown.

Press the Confrn soft key. This will put the other party(ies) on hold and

open a new line.

Dial to another party you invite to the conference.

When the call connects, press the Confrn soft key again to add this party

to the conference.

Repeat the first 4 steps to add more party(ies).

 Once the conference initiator disconnects, no new conferees can be added.

 To abandon the addition of a conferee, press the

 When the maximum number of conferees is hit and the Confrn soft key is

pressed, a message 'Exceeds maximum parties' will be shown on the LCD.

Press the

button of the line being used to return to the conference.

 Ask your department to submit a CSC Work Request to set up the Call Waiting

feature for your IP phone.

 When this feature is enabled, you will hear a call waiting tone and see caller ID

information if a new call comes in while you are on another call.

 To answer the call, press the Answer soft key.

 The line with the held call displays the call-on-hold icon

 To return to the original call, you must put this call on hold by pressing the Hold

soft key or end this call followed by the Resume soft key.

 Use the button to scroll through the calls on hold and press the Resume soft key.

 You may apply different ring type to different phone line or apply the default ring

setting to a selected phone line by pressing Default soft key.

button, choose 'User Preferences' and then 'Rings' option.

1. Press the

2. Select a phone line for the default ring setting.

3. Use the

button to scroll through the ring types. Press Play to hear the

selected ring type. Press the Select soft key at the ring type of your choice

and then press OK soft key.

Staff Office

button to open a line.

button of the line being used.

Aug 2008