Siemens EH..TA11E Manuel d'instruction - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Siemens EH..TA11E. Siemens EH..TA11E 12 pages.
Imprimer la page
Fixing malfunctions
Malfunctions are generally caused by minor faults. Before
contacting Technical assistance, ensure you have read
the following recommendations and warnings.
Display
none
EÖ + number/
p + number/
+ number/
F0/F9
F2
F4
{b
{c/{d
Do not rest hot pans on the control panel.
After-Sales Service
Contact our After-Sales Service for appliance repairs, to
purchase accessories and parts, or regarding any
queries relating to our products and services.
Contact details for our After-Sales Service can be found
in the documentation enclosed.When contacting our
After-Sales Service, please provide the product number
(E-No.) and production number (FD-No.) of the
appliance. This information can be found on the
specifications label affixed to the lower section of the
cooking hob and in the documentation pack.
Malfunction
Measure
The electric power supply
Use other electrical appliances to check if there has been
has been interrupted.
a break in the electric power supply.
The appliance has not
Check that the appliance has been connected correctly
been correctly connected
according to the connection drawing.
according to the
connection drawing.
Electronic system
If the checks above do not remedy the malfunction,
malfunction.
contact technical assistance.
Electronic system
Disconnect the cooking hob from the mains. Wait a few
malfunction
seconds before connecting it again.
If the indication continues, notify the technical assistance
service.
There is an internal error
Disconnect the cooking hob from the mains. Wait a few
in the system
seconds before connecting it again.
If the indication continues, notify the technical assistance
service.
The electronic system has
Wait until the electronic system has cooled down
overheated and the
sufficiently. Then press any symbol on the hob.
corresponding hotplate
If the indication continues, notify the technical assistance
has been switched off
service.
The electronic system has
Wait until the electronic system has cooled down
overheated and all the
sufficiently. Then press any symbol on the hob.
hotplates have been
If the indication continues, notify the technical assistance
switched off
service.
Incorrect supply voltage,
Please contact the local electricity board.
outside normal operating
limits
The hotplate has
Wait until the electronic system has cooled down
overheated and has
sufficiently before switching the hob back on.
switched off in order to
protect the hob
11