Siemens EH6 QA1 Series Manuel d'instructions pour l'installation et l'utilisation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour l'installation et l'utilisation pour {nom_de_la_catégorie} Siemens EH6 QA1 Series. Siemens EH6 QA1 Series 16 pages.

Imprimer la page

Important notes

Safety in use is only guaranteed if the technical installation of

the hob has been carried out correctly and in accordance with

the installation instructions. The installation technician shall be

liable for any damage caused as a result of incorrect

installation.

Only an authorised technician is able to connect the appliance.

The guidelines set out by the local electricity provider must be

observed.

This is a class I appliance and should only be used with an

earthed connection.

Using this appliance without an earth connection or after it has

been incorrectly installed may, under very rare circumstances,

cause serious harm.

The manufacturer accepts no responsibility for any malfunction

or damage caused by incorrect electrical installation.

If the appliance is not fitted with an accessible plug, means for

disconnecting it must be incorporated in the fixed installation, in

accordance with the installation regulations.

The inlet hose must be positioned so that it does not touch any

of the hot parts of the hob or oven.

Induction hobs may only be installed over ovens with the same

brand of forced-air ventilation. Refrigerators, unventilated ovens,

and washing machines may not be installed beneath the hob.

If the hob is installed above a drawer, metal objects stored

inside the drawer could become very hot due to the air

recirculating from the hob ventilation system. If this occurs, an

intermediate support is recommended.

A wooden panel can be used as an intermediate support or

you may order a suitable accessory from our Technical

Assistance Service.

The reference code for this accessory is 680502.

Any change to the appliance's interior, including changing the

power cable, must be performed by the Technical Assistance

Service.

Installing and connecting the hob - Figure 1/2/

3/4/5

Voltage, see specifications plate.

Connect using the connection drawing only.

Removing the hob

Disconnect the appliance from the mains.

Remove the hob by pushing it from below.