Siemens EH601FEB1E Manuel d'instruction - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Siemens EH601FEB1E. Siemens EH601FEB1E 28 pages.

Imprimer la page

Operating the appliance

1Operating the appliance

T his chapter explains how to set a hotplate. The table

O p e r a t i n g t h e a p p l i a n c e

shows heat settings and cooking times for various

meals.

Switching the hob on and off

The main switch is used to switch the hob on and off.

To switch on: Touch the

sounds. The indicator next to the main switch and the

hotplate indicators

light up. The hob is ready to use.

‹

To switch off: Touch the

goes out. All hotplates are switched off. The residual

heat indicator remains lit until the hotplates have cooled

down sufficiently.

Notes

The hob switches off automatically if all hotplates

■

have been switched off for more than 20 seconds.

The selected settings are stored for four seconds

■

after the hob has been switched off. If you switch it

on again during this time, the hob will operate using

the previously stored settings.

Setting the hotplate

The desired power level is set in the programming

panel.

Power level 1 = minimum power.

Power level 9 = maximum power.

Each power level has an intermediate setting. This is

marked with a dot.

Notes

To protect the fragile parts of your appliance from

■

overheating and electrical overloading, the hob may

temporarily reduce the power.

In order to prevent the appliance from producing

■

excess noise, the hob may temporarily reduce the

power.

Selecting a hotplate and heat setting

The hob must be switched on.

Touch the

symbol for the required hotplate.

lights up on the display.

Then select the required heat setting from the

settings range.

The heat setting is set.

symbol. An audible signal

symbol until the indicator

Changing the power level

Select the hotplate and set the desired power level in

the programming zone.

Switch off the hotplate

Select the hotplate and set it to

panel. The hotplate turns off and the residual heat

indicator appears.

Notes

If no pan has been placed on the hotplate, the

■

selected power level flashes. After a certain time has

elapsed, the hotplate switches off.

If a pan has been placed on the hotplate before

■

switching on the hob, it will be detected within

20 seconds of pressing the main switch and the

hotplate will be selected automatically. Once

detected, select the power level within the next

20 seconds or the hotplate will switch off.

If more than one pan is placed on the hob, only one

will be detected when switching it on.

Chef's recommendations

Recommendations

When heating up puree, cream soups and thick

■

sauces, stir occasionally.

Set heat setting 8 to 9 for preheating.

■

When cooking with the lid on, turn the heat setting

■

down as soon as steam escapes between the lid

and the cookware. Steam does not need to escape

for a good cooking result.

After cooking, keep the lid on the cookware until you

■

serve the food.

To cook with the pressure cooker, observe the

■

manufacturer's instructions.

Do not cook food for too long, otherwise the

■

nutrients will be lost. The kitchen clock can be used

to set the optimum cooking time.

For a more healthy cooking result, smoking oil

■

should be avoided.

To brown food, fry small portions in succession.

■

Cookware may reach high temperatures while the

■

food is cooking. We recommend that you use oven

gloves.

You can find recommendations for energy-efficient

■

cooking in section ~ "Environmental protection"

in the programming

‹