Siemens EH765501GBR Manuel d'instruction - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Siemens EH765501GBR. Siemens EH765501GBR 34 pages. Hobs

The Hotplates

Single cooking zone

Extended cooking zone

The resistive hotplate area

Select the appropriate hotplate.

The size of the pan should be the same as that of the

hotplate.

In the Suitable pans" section we recommend two

types of pans for induction cooking.

The size of these hotplates may be altered. The

hotplate must be connected.

How the exterior zone operates:

Place a pan which has the same size base than the

exterior zone. The exterior zone starts working

automatically and the indicator light m comes on.

The plate-warming zone is used for melting chocolate

or butter, and for keepingplates and receptacles hot.

Do not use aluminium foil or plastic, as it will melt.

Switching on the plate-warming zone:

The hotplate must be connected. Press the sensor

. The indicator light located next to the symbol

will light up to show that the plate-warming zone is

now operating.

Switching off:

Press the sensor again. The indicator light will go

out, to show that the plate-warming zone has

switched off.

Residualheat indicator

The plate-warming zone is fitted with a residual heat

indicator V. This indicator warns users that the zone

has been used recently and is still hot. Therefore, nev

er touch the plate-warming zone when this indicator

is visible.

Even if the plate is switched off, the indicator light will

continue to indicate the symbol

cooking zone remains hot enough to cause burns.

The indicator light will switch off when the cooking

zone has cooled sufficiently.

as long as the