Siemens EH8 SB3 Series Manuel d'instruction - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Siemens EH8 SB3 Series. Siemens EH8 SB3 Series 20 pages.
Imprimer la page
To access the basic settings
The hob must be turned off.
Turn on the hob with the main switch.
1.
Within the next 10 seconds, press the
2.
4 seconds.
™‚
is displayed on the left of the screen and
Press the
symbol several times until the indicator for the
0
3.
desired function appears on the left of the screen.
Care and cleaning
The advice and warnings contained in this section aim to guide
you in cleaning and maintaining the hob, so that it is kept in the
best possible condition
Hob
Cleaning
Clean the hob after each use. This prevents food remains left
on the surface from burning. Wait until the hob is cold enough
before attempting to clean it.
Only use cleaning products specifically designed for glass-
ceramic hobs. Follow the instructions provided on the
packaging.
Do not use:
Abrasive products
■
heavy-duty cleaners, like oven sprays and stain removers
■
Pads that may scratch
■
High-pressure or steam cleaners
■
Glass scraper
Remove dried-on food remains using a glass scraper.
Release the scraper safety catch
1.
Use the blade to clean the hob surface
2.
Do not attempt to clean the hob surface with the base of the
scraper. This could result in scratching.
symbol and hold for
0
‹
on the right.
Then select the desired setting in the programming panel.
4.
Press the
symbol again and hold for more than
0
5.
4 seconds.
The settings will have been correctly saved.
Note: For the
setting, first activate the cooking sensor and
™...
turn on the corresponding hotplate. Then, select the required
value using the programming zone for the selected hotplate. If
any other programming panel is touched, no changes can be
made.
Quit
To leave the basic settings, turn off the hob at the main switch.
ã=
Risk of injury!!
The blade is extremely sharp. Risk of cuts. Protect the blade
when not in use. Replace the blade immediately when any
imperfections are found.
Care of the appliance
Apply an additive to protect and preserve the hob. Follow the
advice and warnings provided with the product.
Hob frame
In order to avoid damage to the hob frame, follow the
indications below:
Use only slightly soapy hot water
■
Do not use sharp or abrasive products
■
Do not use a glass scraper
■
Cooking sensor
The glass lens on the cooking sensor must be kept clean.
Regularly clean away splashes of grease and dirt using cotton
swabs or a soft cloth with glass cleaner.
Inappropriate cleaning products
Do not use:
Scouring pads.
■
Cleaning cream.
■
17