Siemens EH8..ML2 series Manuel d'instruction - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Siemens EH8..ML2 series. Siemens EH8..ML2 series 20 pages.
Également pour Siemens EH8..ML2 series : Manuel d'instruction (16 pages)

Imprimer la page

Frying function

This function is used for frying on the front hotplates, regulating
the temperature of the pan.
Deep-frying features
The hotplate only heats when necessary. This way energy is
saved. The oil and fat do not overheat.
Notes
Never leave oil or fat cooking unattended.
■
Place the pan at the centre of the hotplate. Ensure that the
■
base of the pan is the right diameter.
Do not cover the pan with a lid. Doing so will cause the
■
automatic regulation not to function. A protective screen may
be used without affecting the automatic regulation
Only use oil which is suitable for frying. If using butter,
■
margarine, olive oil or pork lard, select the min temperature
setting.

Temperature settings

Power level
Temperature
high
max
medium-high
med
medium-low
low
low
min

Programming

Select the correct temperature setting from the table. Put a pan
on the hotplate.
The range must be switched on.
Press the
symbol. The
~
1.
display.
The possible temperature settings are displayed in the
programming panel.
10
Suitable for
e.g., potato pancakes, sautéed potatoes, and rare beefsteak.
e.g., thin fried foods like frozen pies, escalopes, ragu, vegetables
e.g. thick fried food such as hamburgers and sausages, fish.
e.g. omelettes, using butter, olive oil or margarine
indicator lights up on the hotplate
'

Pans to use with the frying function

There are pans suited to this function which may be purchased
later as optional accessories, in specialised stores, or through
our Technical Assistance Service. Always indicate the related
reference code.
HZ390210 small pan (15 cm in diameter).
■
HZ390220 medium pan (19 cm)
■
HZ390230 large pan (21 cm)
■
The pans are non-stick. Food may also be fried in a small
amount of oil.
The temperature settings shown below have been specially
adjusted for these types of pans.
Note: If a different type of pan is used, try it first at the lowest
temperature, adjusting it as required. The pans may overheat.
Within the next 10 seconds, select the desired temperature
2.
level in the programming panel.
The frying function has been activated.
The temperature symbol stays lit until the frying temperature is
reached. Then the signal sounds and the temperature symbol
light goes out.
Add oil or lard to the pan and then the food.
3.
As usual, turn the food in order to prevent it from burning.
Turning off the deep-frying function
Set to 0 in the programming panel.