Siemens TG.. Manuel d'instruction - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Siemens TG... Siemens TG.. 16 pages.

Timer

The timer can be used in two different ways:
To switch a hotplate off automatically
As a kitchen timer

Automatic hotplate switch-off

Enter a cooking time for the relevant hotplate. When the
cooking time has elapsed, the hotplate switches off
automatically.
Setting the cooking time:
Set the heat setting.
1.
Touch the
symbol. The
0
2.
hotplate lights up.
‹‹
lights up on the timer display. To select
a different hotplate, touch the
indicator for the desired hotplate lights up.
x
Touch the + or - symbol. The default value appears.
3.
+ symbol: 30 minutes
- symbol: 10 minutes
PLQ
Touch the + or - symbol until the desired cooking time
4.
appears on the timer display.
The cooking time counts down. If you have set a cooking time
for several hotplates, you can display each cooking time. To do
this, touch the
symbol repeatedly until the
0
up brightly for the desired hotplate.
When the cooking time has elapsed
When the cooking time has elapsed, the hotplate switches off.
lights up in the hotplate display. The
hotplate lights up brightly. A signal sounds.

Automatic time limit

If a hotplate is in use for a long time without the setting being
changed, the automatic time limit is activated.
The hotplate stops heating.
hotplate indicator.
The display goes out when you touch any control. You can
make new settings.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
10
indicator for the desired
x
symbol repeatedly until the
0
PLQ
indicator lights
x
indicator for the
x
‹‹
lights up on the
and
flash alternately in the
"
timer display for 10 seconds. Touch the
displays go out and the audible signal ceases.
Changing or cancelling the cooking time
Touch the
0
symbol repeatedly until the desired
lights up brightly. Use the + or - symbol to change the cooking
time or to set to
.
‹‹
Note: You can set a cooking time of up to 99 minutes.

Automatic timer

You can use this function to preselect a cooking time for all
hotplates. Each time a hotplate is switched on, the preselected
cooking then counts down. When the cooking time has
elapsed, the hotplate switches off automatically.
You can find out how to switch on the automatic timer in the
Basic settings section.
Note: You can change the cooking time for a hotplate or switch
off the automatic timer for the hotplates.
Touch the
0
symbol repeatedly until the desired
lights up brightly. Use the + or - symbol to change the cooking
time or to set to
‹‹
.

Kitchen timer

You can use the kitchen timer to set a time of up to 99 minutes.
It runs independently of all the other settings.
Setting procedure
Touch the
symbol repeatedly until the
0
1.
kitchen timer lights up.
‹‹
Touch the + or - symbol. The default value appears. +
2.
symbol: 10 minutes - symbol: 05 minutes.
Use the + or - symbol to set the time.
3.
The timer starts counting down after a few seconds.
When the time has elapsed
A signal sounds once the time has elapsed.
the timer display. The
W
indicator for the kitchen timer lights up
brightly. After 10 seconds, the indicator switches off.
Changing the time
Touch the
symbol repeatedly until the
0
kitchen timer lights up. Use the + or - symbol to set the time.
0
symbol. The
x
indicator
x
indicator
indicator for the
W
lights up on the timer display.
‹‹
lights up on
indicator for the
W