Epson CPD-17904 Manuel de l'utilisateur - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Epson CPD-17904. Epson CPD-17904 48 pages. Epson powerlite home 10 projector cpd-17904

Imprimer la page

1. Press the

button. You see the menu screen.

2. Press the

button to select the Image menu. Then press the

Select

select

Picture Quality

3. Use the arrow buttons on the remote control or the

projector to set the following options:

Brightness

Adjusts the brightness of the picture. Increase (+) the setting to make the picture

brighter, or decrease (-) the setting to reduce brightness.

Contrast

Adjusts the contrast between colors or shades in the picture.

Sharpness

Adjusts the sharpness of the picture.

(video only)

Saturation

Adjusts the color depth of the picture.

(component or NTSC video only)

Tint

Adjusts the tint or hue of colors in the picture.

Color Temperature

Adjusts red or blue tones. A lower color temperature produces a picture with more

red, while a higher color temperature produces more blue and sharper color tones.

Flesh Tone

Adjusts the balance of green to magenta in the image.

(computer images only)

Tracking

Removes unwanted vertical lines from a computer image by matching the projector's

internal clock to the computer display signal.

(computer images only)

Sync

Corrects fuzziness by synchronizing the projector with the tracking signal sent from

the computer.

4. Select the

Color Mode

Dynamic

For projecting in bright rooms; images will have greater color intensity.

Living Room

For projecting in rooms with a lot of ambient light; images retain their natural color.

option and choose from these settings:

button again to

Select

buttons on the