Cisco 7962G - Unified IP Phone VoIP Dépannage et maintenance - Page 21

Parcourez en ligne ou téléchargez le pdf Dépannage et maintenance pour {nom_de_la_catégorie} Cisco 7962G - Unified IP Phone VoIP. Cisco 7962G - Unified IP Phone VoIP 27 pages. Unified communications manager 9.0 (sccp and sip)
Également pour Cisco 7962G - Unified IP Phone VoIP : Manuel de l'utilisateur (23 pages), Fiche technique (5 pages), Manuel de l'utilisateur (6 pages), Manuel de l'utilisateur (4 pages), Spécifications (5 pages), Manuel d'administration (12 pages), Manuel de l'utilisateur (13 pages), Manuel de l'utilisateur (12 pages), Manuel de référence rapide (2 pages), Manuel de l'utilisateur (6 pages), Manuel d'administration (16 pages)

Imprimer la page
Cisco 7962G - Unified IP Phone VoIP Dépannage et maintenance
Troubleshooting and Maintenance

Cisco Unified IP Phone Reset or Restore

There are two general methods for resetting or restoring the Cisco Unified IP Phone.

Basic Reset

Performing a basic reset of a Cisco Unified IP Phone provides a way to recover if the phone experiences an
error and provides a way to reset or restore various configuration and security settings.
The following table describes the ways to perform a basic reset. You can reset a phone with any of these
operations after the phone has started up. Choose the operation that is appropriate for your situation.
Table 3: Basic Reset Methods
Operation
Restart phone
Erase softkey

Perform Factory Reset

When you perform a factory reset of the Cisco Unified IP Phone, the following information is erased or reset
to its default value:
• CTL file: Erased
• LSC: Erased
• User configuration settings: Reset to default values
• Network configuration settings: Reset to default values
• Call histories: Erased
• Locale information: Reset to default values
Performing
Press the Services, Settings, or
Directories button and then press
**#**.
From the Settings menu, unlock
phone options (see
Unlock and
Lock
Options). Then press the
Erase softkey.
From the Network Configuration
menu, unlock phone options (see
Unlock and Lock
Options). Then
press the Erase softkey.
From the Security Configuration
menu, unlock phone options (see
Unlock and Lock
Options). Then
press the Erase softkey.
Troubleshooting and Maintenance
Cisco Unified IP Phone Reset or Restore
Explanation
Resets any user and network
configuration changes that you have
made, but that the phone has not
written to its Flash memory, to
previously saved settings, then
restarts the phone.
Resets user and network
configuration settings to their
default values, deletes the CTL file
from the phone, and restarts the
phone.
Resets network configuration
settings to their default values and
resets the phone. This method
causes DHCP to reconfigure the IP
address of the phone.
Deletes the CTL file from the
phone and restarts the phone.
21