Digital Juice Miniburst 256 Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Digital Juice Miniburst 256. Digital Juice Miniburst 256 13 pages. Portable led video light system

Imprimer la page

USER'S GUIDE

Operating

Your MiniBurst

Lighting System

a. Attach the LED light fixture to the desired mounting location using the

included hotshoe swivel mount or any other ¼"-20 mounting accessory.

Caution: When attaching any ¼"-20 threaded stud to the mount-

ing and accessory holes on the MiniBurst light (17, 18), do not

use excessive force, pliers or any other tools, as there is a limited

depth available to accept the ¼"-20 threaded stud and you could

cause damage to your light which would void your warranty.

b. Attach the included battery pack (2, 3) to the battery plate (19) on

the light. The MiniBurst light also accepts most SONY DV batter-

ies: Sony NP-F Series, Sony FH-Series, and Sony FP-Series.

NOTE: (The MiniBurst 128 requires a 2100 mAh battery while the

MiniBurst 256 requires a 4000mAh battery or greater). Alterna-

tively, you could plug the included AC power supply adapter (1)

into the DC Power In (15) on the side of the light to power it.

c. Power the light ON with the power switch (14). The dimmer knob

(16) can be used to control the intensity of the light. Turning the

dimmer knob in a clockwise direction will increase the intensity and

turning it counter-clockwise will decrease the intensity of its output.

d. Install the optional Warming (9) or Diffusion (10) filter (if needed).

Slide the desired filter into the groove provided on the front of the

light frame and secure it in place with gaffer's tape.