Cisco 7970 Series Manuel du téléphone - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel du téléphone pour {nom_de_la_catégorie} Cisco 7970 Series. Cisco 7970 Series 45 pages. Unified ip phone
Également pour Cisco 7970 Series : Mise en place (15 pages), Référence rapide (2 pages)
Imprimer la page
Adjusting the Footstand
To change the angle that your phone sits on your desktop, adjust the footstand while pressing the
footstand button.
Adjusting the Handset Rest
When you connect your phone, you might want to adjust the handset rest to ensure that the receiver
will not slip out of the cradle. See the table below for instructions.
1
2
Set the handset aside and pull the square plastic tab from the handset rest.
1
Rotate the tab 180 degrees.
2
Slide the tab back into the handset rest. An extension protrudes from the top of the rotated tab.
3
Return the handset to the handset rest.
Registering with TAPS
After your phone is connected to the network, your system administrator might ask you to
auto-register your phone using TAPS (Tool for Auto-Registered Phones Support). TAPS might be used
either for a new phone or to replace an existing phone.
To register with TAPS, pick up the handset, enter the TAPS extension provided by your system
administrator, and follow the voice prompts. You might need to enter your entire extension, including
the area code. After your phone displays a confirmation message, hang up. The phone will re-start.
6
3
78-15630-02