Cisco 8831 Manuel d'installation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Cisco 8831. Cisco 8831 14 pages. Hard factory reset
Également pour Cisco 8831 : Caractéristiques (17 pages), Manuel de déploiement (6 pages), Manuel de référence rapide (2 pages), Manuel de l'utilisateur (6 pages), Manuel de référence rapide (6 pages), Manuel de l'utilisateur (15 pages), Manuel de référence rapide (2 pages), Manuel de démarrage rapide (13 pages), Manuel de dépannage (3 pages)

Imprimer la page

Cisco Unified IP Conference Phone 8831 Installation

The following table describes the Wireless Microphone Options and, where applicable, explains how to change

them.

Table 3: Wireless Microphone Options

Option

Wireless Microphone 1

Wireless Microphone 2

Wireless Microphone Range

Pair Wireless Microphone

Before You Begin

The microphone must be in the off state before you can pair it to the conference station. A microphone is off

if the microphone's LED is off. To turn off the wireless microphone, hold down the microphone button until

the microphone LED turns solid red, then release.

Procedure

Step 1

Choose Apps > Admin Settings > Wireless Microphones.

Step 2

Select either Wireless Microphone 1 or Wireless Microphone 2.

If the selected channel is available, a Pair microphone 1? or Pair microphone 2? prompt displays,

and the Pair softkey displays.

If a microphone is already linked to a particular channel, pairing cannot be initiated on the selected channel

and the dialog shows that the microphone is linked.

Step 3

Press Pair.

If the channel is ready to pair, the pairing process begins and a text message displays.

Step 4

Put the microphone that corresponds to the selected channel in pairing mode by pressing the microphone's

Mute button until the LED lights solid red.

Description

The channel that can be used to

pair the first microphone.

The channel that can be used to

pair the second microphone.

Sets the baseband power and

effective RF range for the wireless

microphones.

The RF range can be set to

Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager 9.0

• Low

• Medium

• High

Wireless Microphone Menu

To Change

See

Pair Wireless Microphone, on

page 11

Unpair Wireless

Microphone, on page 12

See

Pair Wireless Microphone, on

page 11

Unpair Wireless

Microphone, on page 12

Select Low, Medium or High, and

press Select. Or press Default to

select the default setting and press

Select.